08-15-2009, 10:01 PM
Hi guys,
I spent part of the day running my keel lumber through the joiner working on a getting a straight edge. Towards the end of the day I hopped on the lathe to play around with some mock ups for my deadeyes. (poplar is cheaper practice than Lignum Vitae!)
Attached are a couple of pics:
These ended up being about 3 inches in diameter with 7/16 holes.
I have not cut the relief into the edges of the holes to alleviate chafe as of yet.
Cheers,
Dave G.
My Construction Blog
I spent part of the day running my keel lumber through the joiner working on a getting a straight edge. Towards the end of the day I hopped on the lathe to play around with some mock ups for my deadeyes. (poplar is cheaper practice than Lignum Vitae!)
Attached are a couple of pics:
These ended up being about 3 inches in diameter with 7/16 holes.
I have not cut the relief into the edges of the holes to alleviate chafe as of yet.
Cheers,
Dave G.
My Construction Blog