09-07-2007, 08:34 AM
Not quite ready to paint, but darn close (the hull anyway).
Sounds like the average hull is around 2 quarts of paint?
Do many people paint a water line? I was thinking that since there were the two rub rails, that most don't bother with a water line stripe?
Do most people use closed cell high density foam roller then use a brush for tipping? and if so... would a 2" wide China Bristle Brush work?
I plan on washing/scrubbing my final epoxy coat then sand with 80 grit, prime then paint.
Sounds like the average hull is around 2 quarts of paint?
Do many people paint a water line? I was thinking that since there were the two rub rails, that most don't bother with a water line stripe?
Do most people use closed cell high density foam roller then use a brush for tipping? and if so... would a 2" wide China Bristle Brush work?
I plan on washing/scrubbing my final epoxy coat then sand with 80 grit, prime then paint.